During the hot summer season days, the ice maker is our very best friend in the kitchen. But what if your ice maker abruptly stops creating any ice, what are you to do? Nicely, my pal, you are in luck, since this report will help you know the purpose why and what are the necessary measures to carry out in order to resolve the challenge.
So, why is yoursite.com not creating any ice?
1. Power connection
Before anything else, check whether or not your machine is connected to the power outlet, if it is, verify if the energy outlet is functioning properly and is transmitting electric present. Then turn on your ice maker to verify if it is okay or not. The wire along the ideal side of the machine should be lowered as far as it goes. If this is in a raised position, your machine is off and it will not make any ice.
two. Right freezer temperature
If the icemaker wire is positioned properly and is turned on, proceed to verify the freezer temperature. The temperature should be within the range of to 8 degrees Fahrenheit. If it is above 10 to 12 degrees, your machine will not make ice.
For a newly installed icemaker, you will have to have up to 24 hours to let the machine function and cool down. mysite.com installed icemaker may perhaps not function till the ice mold temperature has dropped to about 15F – 16F degrees. If you have just added a water line to the refrigerator, it may take up to about an hour and a half for the machine to start off operating. Also, a newly installed water line could have air in the line. It can occasionally take a handful of ice making cycles to clear the line of air.
three. Verify water supply
Okay, in order to make ice, you need to have water. So make confident that there is water flowing to the ice maker. Check for kinks in the tubing and appear out for frozen particles stuck within the water tube. Also make certain that the household water supply is turned on. At times the water inlet valve can go undesirable. If there is water in the ice maker, but it’s not freezing, use a freezer thermometer to verify that the temperature is cold enough for it to freeze.
four. Check copper provide
Make certain the copper supply line to the refrigerator is turned on below the sink, or coming from the basement.
Right after checking all the above described aspects and certain that the freezer is cold adequate but it is still not generating any ice, verify and feel the bottom of the ice maker unit. This spot is normally cold for an ice maker operating smoothly. But if it is hot or warm, it is possible that the little heating element inside is stuck or damaged. This heating element when turned on melts the bottom of the cubes so that they can be released and harvested by the ejector blades. In this case, you will have to replace this aspect in order to make your ice maker function smoothly again.